Leaderboard Merger configuration for CyberBoxer and CyberPunch machines

Leaderboard Merger is a separate device designed to collect data from multiple machines and combines them into one shared leaderboard.

Getting Started

Package contents

Leaderboard Merger hardware kit

• Electronics unit
• USB-C power supply
• Service keyboard
• HDMI cable

Requirements

Before setup, prepare:

• A display device of your choice (monitor, TV, projector, CCTV system, or any HDMI input device)
• WiFi credentials for network with Internet access (for Scenario 1)
• Machine serial numbers (for Scenario 1)
  • Each serial number (S/N) has 16 characters
  • You can find it in the operator menu of each machine (bottom-right corner)

Hardware installation

Follow these steps:

1. Connect the HDMI cable to the display
2. Connect the service keyboard
3. Connect the power supply (USB-C)
4. Wait for the system to boot

Preparing Boxers

• In scenario 1, you will need to provide serial numbers from boxers that you want to link with the Leaderboard Merger.
• For better user experience, you can label each boxer with a location name. This label will be used on Leaderboard Merger next to displayed scores.

Linking Scenarios

Depending on your needs and infrastructure, pick one of the connection and linking scenarios.

Scenario 1: Online connection

Use this setup when machines are in different locations.

All devices must have internet access. Each machine automatically sends data to the cloud server. Leaderboard Merger downloads and combines selected data.

Steps

1. Press 5 on the service keyboard to open the operator menu
2. Go to WiFi section
3. Select your WiFi network and connect
4. Go to Network → Highscores Server
5. Set it to global
6. Go to Serials → Add machine serial number
7. Enter serial numbers of every machine that you want to include
8. Go to Exit
9. Wait couple seconds for data to be downloaded

Scenario 2: Local network connection

Use this setup when all devices are in the same LAN.

This method is faster and does not require internet access. Leaderboard Merger collects data directly from machines.

Steps

1. Press 5 on the service keyboard to open the operator menu
2. Go to WiFi section
3. Select your WiFi network and connect
4. Go to Network → Highscores Server
5. Set it to local
6. Go to Network → Local Access Point
7. Set it to inactive
8. Go to Exit
9. Wait couple seconds for data to be downloaded

Notes

• Leaderboard Merger becomes visible in the local network
• Machines need to be in the same WiFi / WLAN
• Machines automatically detect the Merger and send data
• No need to enter serial numbers
• No need to change settings on machines

Scenario 3: Local Access Point (no WiFi available)

Use this setup when there is no WiFi network available.

Leaderboard Merger creates its own WiFi Access Point. Nearby machines must connect to it.

Steps (Leaderboard Merger)

1. Press 5 on the service keyboard to open the operator menu
2. Go to WiFi section
3. (Skip connection if no network is available)
4. Go to Network → Highscores Server
5. Set it to local
6. Go to Network → Local Access Point
7. Set it to active
8. Wait a few seconds

Result

• A new WiFi network appears:
  • Leaderboard-AP-1000xxxxxxxxxxxx
• A password is displayed on screen

1. Write down the password
2. Go to Exit

Steps (each machine)

Repeat on every Boxer Machine:

1. Press 5 on the service keyboard to open the operator menu
2. Go to WiFi section
3. Find the Leaderboard-AP-1000xxxxxxxxxxxx network
4. Connect using the displayed password
5. Go to Exit

Notes

• Leaderboard Merger becomes the Access Point for nearby boxer machines
• Once connected with this Access Point, machines will not have internet access
• Machines automatically detect the Merger and send data
• No need to enter serial numbers
• No need to change settings on machines