Leaderboard Merger

From SlimLukeGames Wiki
Revision as of 12:42, 16 December 2025 by Matt (talk | contribs) (Created page with "Leaderboard Merger is a standalone hardware device responsible for collecting leaderboard data from a defined set of boxer machines, merging those results into a single ranking, and presenting the combined leaderboard on its own display. The device operates independently from the boxer machines and periodically synchronizes data according to the selected connection scenario. == Machine List Configuration == Leaderboard Merger requires a configuration file containing a...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Leaderboard Merger is a standalone hardware device responsible for collecting leaderboard data from a defined set of boxer machines, merging those results into a single ranking, and presenting the combined leaderboard on its own display.

The device operates independently from the boxer machines and periodically synchronizes data according to the selected connection scenario.

Machine List Configuration

Leaderboard Merger requires a configuration file containing a list of machine serial numbers. Only machines listed in this file will be queried for leaderboard data. This mechanism allows precise control over which machines participate in the merged leaderboard (for example: machines located in a single venue, hall, or event zone).

Connection Scenarios

Leaderboard Merger supports two operating modes:

  • Local
  • Global

Each scenario defines how the device communicates with boxer machines and how frequently the data is refreshed.

Local Scenario

In the local scenario, the Leaderboard Merger and all boxer machines must be connected to the same local wireless network (WLAN).

  • No internet connection is required
  • Data refresh interval is 5 seconds.
  • This mode is recommended for on‑site installations such as arcades, bars, or events.
  • Typical use cases: single venue, event installation, temporary locations without internet access

Notice: If no existing WLAN is available at the location, the Leaderboard Merger can be configured to create its own wireless access point. In this setup:

  • Leaderboard Merger acts as the Wi‑Fi access point
  • Boxer machines connect directly to this network

Global Scenario

In the global scenario, the Leaderboard Merger and boxer machines communicate over the internet.

Key characteristics:

  • Each device connects to an internet‑enabled WLAN
  • Devices do not need to be on the same local network
  • Data is retrieved via remote servers
  • Data refresh interval is 60 seconds.
  • This mode is suitable for aggregating leaderboards from geographically distributed locations.
  • Typical use cases: chain locations, distributed tournaments, global or regional rankings